Kontron CP305 BIOS - Manual (Page 67)

CP305 BIOS Boot Setup
ID 1035-8356, Rev. 1.0 Page 57
P R E L I M I N A R Y
Add-On ROM Display Mode
This function is used to display add-on ROM (read-only memory) messages such as SCSI
BIOS or VGA BIOS in addition to CP305-specific information.
Optimal and Fail-Safe default settings: Force BIOS
Boot-Up Num-Lock
This function is used to allow the Number Lock setting to be modified during boot-up.
Optimal and Fail-Safe default settings: On
PS/2 Mouse Support
This function is used to allow the PS/2 mouse support to be adjusted.
Note: When a serial mouse is installed, use the setting Disabled.
Optimal and Fail-Safe default settings: Auto
SETTING DESCRIPTION
Force BIOS Use this setting to allow the system to display third party BIOS messages during boot-up as
well.
Keep Current Use this setting to allow the system to display only CP305 information during system boot.
SETTING DESCRIPTION
Off Use this setting to prevent the system from automatically enabling the keyboard Number
Lock during boot-up.
To use the 10-key numeric keypad on the keyboard, press the Number Lock key located on
the upper left-hand corner of the numeric keypad. The Number Lock LED on the keyboard
will light up when the Number Lock is active.
On Use this setting to allow the Number Lock on the keyboard to be enabled automatically dur-
ing boot-up. This allows the immediate use of 10-key numeric keypad located on the right
side of the keyboard. To confirm this, the Number Lock LED light on the keyboard will be lit.
SETTING DESCRIPTION
Disabled Use this setting to prevent the PS/2 mouse port from using system resources and becoming
active.
Enabled Use this setting to allow the system to use a PS/2 mouse.
Auto Use this setting to allow the system to automatically use a PS/2 mouse if a PS/2 mouse is
connected.