Kontron CP305 BIOS - Manual (Page 99)

CP305 BIOS OEM Feature
ID 1035-8356, Rev. 1.0 Page 89
P R E L I M I N A R Y
CP305 FRONT/REAR CONFIG SCREEN
This screen provides functions for specifying the CP305 Front/Rear configuration settings.
VGA Connector SDO
This function is used to select the VGA connector routing.
Warning! Do not route the VGA connector to rear I/O if there is no rear I/O module installed!
Failure to comply with the instruction above will cause the monitor to display a blank
screen and may result in damage to the board. If this occurs, contact Kontron’s
Technical Support for further assistance.
Optimal and Fail-Safe default settings: Front
SETTING DESCRIPTION
Disabled Use this setting to disable the VGA connector. This does not include the VGA device.
Auto Use this setting to allow the BIOS to automatically detect where a monitor is installed.
Front Use this setting to specify that only the front connector is usable.
Rear
SEE WARNING ABOVE! Use this setting to specify that VGA is routed to rear I/O.