Climate control, Overview of climate control systems – Mercedes-Benz GLA-Class 2015 Owners Manual User Manual

Page 130

Advertising
background image

?

To activate/deactivate air-recirculation mode (

Y

page 137)

A

To set the airflow (

Y

page 134)

B

To switch cooling with air dehumidification on/off (

Y

page 131)

C

To switch the rear window defroster on/off (

Y

page 136)

Notes on using the air-conditioning

system

Air-conditioning system

Below, you can find a number of notes and

recommendations to help you use the air-

conditioning system optimally.

R

Switch on the air-conditioning system by

turning control knob A clockwise to the

desired position (except position 0).

R

Set the temperature to 72 ‡ (22 †).

R

Recommendation for avoiding misted

windows at low exterior temperatures

or in rain: switch on the ¿ cooling with

dehumidification function (

Y

page 131).

Set air distribution to ¯ and if possible

switch off P and O (

Y

page 134).

In air-recirculation mode, switch e off

(

Y

page 137).

Set airflow control A to a setting between

3 and 6 (

Y

page 134).

R

Recommendation for rapid cooling or

heating of the vehicle interior: briefly set

airflow control A to a setting between 3

and 6 (

Y

page 134).

R

Recommendation for a constant vehi-

cle interior temperature: set airflow con-

trol A to a setting between 1 and 3

(

Y

page 134).

R

Recommendation for air distribution in

the winter: set O and ¯

(

Y

page 134).

Recommendation for air distribution in

the summer: set P or P and ¯

(

Y

page 134).

R

Only use the "Windshield defrosting" func-

tion briefly until the windshield is clear

again.

R

Only use air-recirculation mode briefly, e.g.

if there are unpleasant outside odors or

when in a tunnel. The windows could oth-

erwise fog up, since no fresh air is drawn

into the vehicle in air-recirculation mode.

R

Vehicles with COMAND: if you change the

settings of the climate control system, the

climate status display appears for three

seconds at the bottom of the screen in the

COMAND display. See also the separate

COMAND operating instructions. You will

see the current settings of the various cli-

mate control functions.

ECO start/stop function

During automatic engine switch-off, the cli-

mate control system only operates at a

reduced capacity. If you require the full cli-

mate control output, you can switch off the

ECO start/stop function by pressing the ECO

button (

Y

page 146).

128

Overview of climate control systems

Climate

control

Advertising