Wheels and tires, Loading the vehicle – Mercedes-Benz GLA-Class 2015 Owners Manual User Manual

Page 338

Advertising
background image

of the tire sizes and corresponding pres-

sures for tires mounted at the factory.

(2) The vehicle identification plate is on the

B-pillar on the driver's side. The vehicle

identification plate informs you of the

gross vehicle weight rating. It is made up

of the vehicle weight, all vehicle occu-

pants, the fuel and the cargo. You can

also find information about the maximum

gross axle weight rating on the front and

rear axle.
The maximum gross axle weight rating is

the maximum weight that can be carried

by one axle (front or rear axle). Never

exceed the maximum load or the maxi-

mum gross axle weight rating for the

front or rear axle.

Maximum permissible gross vehicle

weight rating

X

Specification for maximum gross vehicle

weight : is listed in the Tire and Loading

Information placard: "The combined weight

of occupants and cargo should never

exceed XXX kilograms or XXX lbs."

The gross weight of all vehicle occupants,

load, luggage and trailer load/noseweight (if

applicable) must not exceed the specified

value.

i

The specifications shown on the Tire and

Loading Information placard in the illustra-

tion are examples. The maximum permis-

sible load is vehicle-specific and may devi-

ate from the data shown here. The maxi-

mum permissible load that applies for your

vehicle can be found on your vehicle's Tire

and Loading Information placard.

Number of seats

Maximum number of seats : indicates the

maximum number of occupants allowed to

travel in the vehicle. This information can be

found on the Tire and Loading Information

placard.

i

The specifications shown on the Tire and

Loading Information placard in the illustra-

tion are examples. The number of seats is

vehicle-specific and can differ from the

details shown. The number of seats in your

vehicle can be found on the Tire and Load-

ing Information placard.

Determining the correct load limit

Step-by-step instructions

The following steps have been developed as

required of all manufacturers under Title 49,

Code of U.S. Federal Regulations, Part 575

pursuant to the "National Traffic and Motor

Vehicle Safety Act of 1966".

X

Step 1: Locate the statement "The com-

bined weight of occupants and cargo

should never exceed XXX kg or XXX lbs." on

336

Loading the vehicle

Wheels

and

tires

Advertising