Safety, Occupant safety – Mercedes-Benz GLA-Class 2015 Owners Manual User Manual

Page 49

Advertising
background image

The shoulder section of the seat belt must

always be routed across the center of the

shoulder. Adjust the belt outlet if necessary.

X

To raise: slide the belt outlet upwards.

The belt outlet will engage in various posi-

tions.

X

To lower: hold belt outlet release : and

slide the belt outlet downwards.

X

Let go of belt outlet release : in the

desired position and make sure that the

belt outlet engages.

All seat belts except the driver's seat belt are

equipped with a special seat belt retractor to

securely fasten child restraint systems in the

vehicle. Further information can be found

under "Special seat belt retractor"

(

Y

page 59).

Releasing seat belts
!

Make sure that the seat belt is fully rolled

up. Otherwise, the seat belt or belt tongue

will be trapped in the door or in the seat

mechanism. This could damage the door,

the door trim panel and the seat belt. Dam-

aged seat belts can no longer fulfill their

protective function and must be replaced.

Visit a qualified specialist workshop.

X

Press release button :, hold belt

tongue ; firmly and guide it back towards

belt outlet =.

Belt warning for the driver and front

passenger

The 7 seat belt warning lamp in the instru-

ment cluster is a reminder that all occupants

must fasten their seat belts. It may light up

continuously or flash. In addition, there may

be a warning tone.
Regardless of whether the driver's seat belt

has already been fastened, the 7 seat belt

warning lamp lights up for six seconds each

time the engine is started. If, after

six seconds, the driver or front-passenger

seat belt has not been fastened and the doors

are closed, the 7 seat belt warning lamp

lights up again. As soon as the driver's and

front-passenger seat belts are fastened or a

front door is opened again, the 7 seat belt

warning lamp goes out.
If the driver's seat belt is not fastened after

the engine is started, an additional warning

tone will sound. This warning tone stops after

six seconds or when the driver's seat belt is

fastened.
If the vehicle's speed exceeds 15 mph

(25 km/h) once and the driver's and front-

passenger seat belts are not fastened, a

warning tone sounds. The warning tone

sounds with increasing intensity for

60 seconds or until the driver or front

passenger have fastened their seat belts.
If the driver or front passenger unfasten their

seat belts during the journey, the seat belt

warning is activated again.

i

For more information on the 7 seat

belt warning lamp, see "Warning and indi-

cator lamps in the instrument cluster, seat

belts" (

Y

page 252).

Occupant safety

47

Safety

Z

Advertising