Mercedes-Benz M-Class 2015 Owners Manual - Manual (Page 110)

Rear seat head restraints
Adjusting the rear seat head restraint
height
X
Once the head restraint is fully lowered,
press release catch :.
X To raise: pull the head restraint up to the
desired position.
X
To lower: press release catch : and push
the head restraint down until it is in the
desired position.
Removing and installing the rear seat
head restraints
X To remove: pull the head restraint up to
the stop.
X
Press release catch : and pull the head
restraint out of the guides.
X To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X
Push the head restraint down until you hear
it engage in position.
Adjusting the angle of the rear seat
backrests
You can adjust the angle of the backrests in
the second row of seats. There are ten detent
positions to choose from.
X Pull the left or right release lever ;
upwards in the direction of the arrow until
relevant backrest : is fully released.
X
Pull backrest : forwards in the direction of
the arrow and allow it to engage.
X To ensure that the backrest has engaged,
lean firmly against backrest :.
Adjusting the multicontour seat
You can set the multicontour seat using
COMAND. See the separate COMAND Oper-
ating Instructions.
Adjusting the 4-way lumbar support
: To raise the backrest contour
; To soften the backrest contour
108
Seats
Se
ats,
ste
eri
ng
wh
ee
land
mirrors