Mercedes-Benz M-Class 2015 Owners Manual - Manual (Page 343)

Removing/installing the cargo com-
partment cover (without integrated
cargo net)
X To remove: make sure that cargo com-
partment cover : is rolled up.
X
Push end cap = of cargo compartment
cover : in the direction of the arrow on the
right or left-hand side.
X
Push cargo compartment cover : into
opposite anchorage ;.
X Remove cargo compartment cover :.
X To install: if installed, remove the protec-
tive caps from the side panels of the seat
row in which the cargo compartment cover
is to be installed. Use a suitable object
here, e.g. a coin.
X
Install the protective caps to the side pan-
els of the other seat row.
X
Place cargo compartment cover : into
anchorage ; on the right or left-hand side.
X
Push in opposite end cap = of cargo com-
partment cover : in the direction of the
arrow and insert cargo compartment
cover : into opposite anchorage ;.
Removing/installing the combined
cargo cover and net (cargo compart-
ment cover with integrated cargo net)
You can install and remove the combined
cargo cover and net from the cargo compart-
ment.
X
Make sure that the cargo net and the cargo
compartment cover are rolled up.
X To remove: press button ;.
X
Swing the combined cargo cover and net in
the direction of the arrow.
X
First, detach the combined cargo cover and
net from left-hand catch : and then
remove it from right-hand fixture =.
X
To install: push the combined cargo cover
and net up to the stop into right-hand fix-
ture =.
X
Place the combined cargo cover and net
into the left-hand fixture and push it into
catch : until the combined cargo cover
and net engages audibly.
X Make sure that red lock status indicator ?
is no longer visible. The combined cargo
Stowage areas
341
Stow
age
and
fea
tures
Z