Breakdo wn ass is tanc e, Towing and tow-starting – Mercedes-Benz E-Wagon 2014 Owners Manual User Manual

Page 368

Advertising
background image

Removing the towing eye

X

Unscrew and remove the towing eye.

X

Attach cover : to the bumper and press

until it engages.

X

Place the towing eye in the vehicle tool kit.

Towing the vehicle with the rear axle

raised

!

The ignition must be switched off if you

are towing the vehicle with the rear axle

raised. Intervention by ESP

®

could

otherwise damage the brake system.

Only possible for vehicles without

4MATIC.

X

Switch on the hazard warning lamps

(

Y

page 132).

X

Turn the SmartKey to position 0 in the

ignition lock and remove the SmartKey

from the ignition lock.

X

When leaving the vehicle, take the

SmartKey or the KEYLESS-GO key with you.

When towing your vehicle with the rear axle

raised, it is important that you observe the

safety instructions (

Y

page 364).

Towing a vehicle with both axles on

the ground

It is important that you observe the safety

instructions when towing away your vehicle

(

Y

page 364).

The automatic transmission automatically

shifts to position P when you open the driver's

or front-passenger door or when you remove

the SmartKey from the ignition lock. In order

to ensure that the automatic transmission

stays in position N when towing the vehicle,

you must observe the following points:

X

Make sure that the vehicle is stationary and

the SmartKey in the ignition lock is in

position 0.

X

Turn the SmartKey to position 2 in the

ignition lock.
On vehicles with KEYLESS-GO, use the

SmartKey instead of the Start/Stop button

(

Y

page 159).

X

Depress and hold the brake pedal.

X

Shift the automatic transmission to

position N.

X

Release the brake pedal.

X

Release the parking brake.

X

Switch on the hazard warning lamps

(

Y

page 132).

X

Leave the SmartKey in position 2 in the

ignition lock.

i

When towing with the hazard warning

lamps switched on, use the combination

switch as usual to signal a change of

direction. In this case, only the turn signals

for the desired direction flash. After

resetting the combination switch, the

hazard warning lamps start flashing again.

Transporting the vehicle

!

You may only secure the vehicle by the

wheels, not by parts of the vehicle such as

axle or steering components. Otherwise,

the vehicle could be damaged.

The towing eye can be used to pull the vehicle

onto a trailer or transporter for transporting

purposes.

366

Towing and tow-starting

Breakdo

wn

ass

is

tanc

e

Advertising
This manual is related to the following products: