Driving and parking, Driving systems – Mercedes-Benz GLK-Class 2013 Owners Manual User Manual
Page 197

Activating the 360° camera using
reverse gear
The 360° camera images can be
automatically displayed by engaging reverse
gear.
X
Make sure that the SmartKey is in position
2 in the ignition lock.
X
Make sure that the
Activation by R
gear
setting is active in COMAND, see the
separate COMAND operating instructions.
X
To show the 360° camera image: engage
reverse gear.
The COMAND display shows the area
behind the vehicle in split screen:
R
vehicle with guide lines
R
top view of the vehicle
Selecting the split-screen and full
screen displays
X
To switch between split screen views:
switch to the line with the vehicle icons by
sliding ZV the COMAND controller.
X
Turn cVd the COMAND controller and
select one of the vehicle symbols.
X
To switch to full screen mode: select
Full Screen
by turning cVd the
COMAND controller and press W to
confirm.
Displays in the COMAND display
Important safety notes
!
Objects not at ground level may appear to
be further away than they actually are, e.g.:
R
the bumper of a parked vehicle
R
the drawbar of a trailer
R
the ball coupling of a trailer tow hitch
R
the rear section of an HGV
R
a slanted post
Use the guidelines only for orientation.
Approach objects no further than the
bottom-most guideline.
Top view with picture from the rear view
camera
:
Symbol for the split screen setting with
top view and rear view camera image
;
Yellow guide line at a distance of
approximately 13 ft (4.0 m) from the rear
of the vehicle
=
Yellow guide line for the vehicle width
including the exterior mirrors, for current
steering wheel angle (dynamic)
?
Yellow lane marking tires at current
steering wheel angle (dynamic)
A
Yellow guide line at a distance of
approximately 3 ft (1.0 m) from the rear
of the vehicle
B
Vehicle center axle (marker assistance)
C
Red guide line at a distance of
approximately 12 in (0.30 m) from the
rear of the vehicle
D
Bumper
The guide lines are shown when the
transmission is in position R.
The distance specifications only apply to
objects that are at ground level.
Driving systems
195
Driving
and
parking
Z