Safety, Children in the vehicle – Mercedes-Benz GLK-Class 2013 Owners Manual User Manual

Page 64

Advertising
background image

X

Install the LATCH-type (ISOFIX) child

restraint system. Comply with the

manufacturer's instructions when

installing the LATCH-type (ISOFIX) child

restraint system.

Top Tether

G

WARNING

Always lock the rear seat backrests in their

upright position when the rear seats are

occupied by passengers. Lock the rear seat

backrests in their upright position before

installing the Top Tether straps or when the

cargo compartment is not in use. Make sure

that rear seat backrests are secured properly

by pushing and pulling on the seat backrests.

If the seat backrest is not locked properly, the

seat backrest could fold forward. The child

restraint system is no longer supported

properly or held in position and can no longer

fulfill its function. This could cause serious or

even fatal injuries.

Top Tether provides an additional connection

between a child restraint system, secured

with a LATCH-type (ISOFIX) child seat mount,

and the rear seat. This helps reduce the risk

of injury even further.
The Top Tether anchorages are located on the

rear side of the rear seat backrests.

X

Move head restraint : upwards.

X

Install the LATCH-type (ISOFIX) child

restraint system with Top Tether. Comply

with the manufacturer's installation

instructions when doing so.

X

Route Top Tether belt A under head

restraint : between the two head restraint

bars.

X

Guide Top Tether belt A downwards

between cargo compartment cover ; and

rear seat backrest.

X

Hook Top Tether hook ? of Top Tether belt

A into Top Tether anchorage =.
Make sure that:

R

Top Tether hook ? is hooked into Top

Tether anchorage = as shown.

R

Top Tether belt A is not twisted.

R

Top Tether belt A is routed between the

rear seat backrest and cargo

compartment cover ; if cargo

compartment cover ; is installed.

R

Top Tether belt A is routed between the

rear seat backrest and the cargo net if

the cargo net is installed.

X

Tension Top Tether belt A. Comply with

the manufacturer's installation

instructions when doing so.

X

Move head restraint : back down again

slightly if necessary (

Y

page 99). Make

sure that you do not interfere with the

correct routing of Top Tether belt A.

62

Children in the vehicle

Safety

Advertising