On-boar d comput er and displa ys, Menus and submenus – Mercedes-Benz GLK-Class 2013 Owners Manual User Manual
Page 229
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Instr. Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display:
function.
You will see the selected setting
Outside
Temperature
or
Speedometer [km/h]
(USA)/
Speedometer [mph]
(Canada).
X
Press the a button to save the setting.
i
The speed is shown in km/h (USA)/mph
(Canada).
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Day Lights
function.
If the
Day Lights
function has been
switched on, the cone of light and the
W symbol in the multifunction display
are shown in red.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 111).
Setting the brightness of the display/
switch
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Brightness Display/Switches:
function.
You will see the selected setting.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to any level from
Level 1
to
Level 5
(bright).
X
Press the a or % button to save the
setting.
Switching Adaptive Highbeam Assist on/
off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Adapt. Highbeam
function.
If the
Adapt. Highbeam
function has been
switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X
Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y
page 114).
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
X
Press the = or ; button on the
steering wheel to select the
Sett.
menu.
X
Press the : or 9 button to select the
Lights
submenu.
X
Press a to confirm.
Menus and submenus
227
On-boar
d
comput
er
and
displa
ys
Z