Lights and windshiel dw iper s, Exterior lighting – Mercedes-Benz SLK-Class 2013 Owners Manual User Manual

Page 109

Advertising
background image

Automatic headlamp mode

G

WARNING

If the light switch is set to à and it is foggy,

snowing or there is poor visibility, the low-

beam headlamps will not come on

automatically. This could endanger you and

others. In such situations turn the light switch

to L.
The automatic headlamp feature is only an

aid. The driver is responsible for the vehicle's

lighting at all times.

à is the favored light switch setting. The

light setting is automatically selected

according to the brightness of the ambient

light (exception: poor visibility due to weather

conditions such as fog, snow or spray):

R

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off

automatically depending on the brightness

of the ambient light.

R

With the engine running: if you have

activated the daytime running lamps

function via the on-board computer, the

daytime running lamps or the low-beam

headlamps and parking lamps are switched

on or off automatically depending on the

brightness of the ambient light.

X

To switch on automatic headlamp

mode: turn the light switch to Ã.

Only for Canada:
The daytime running lamps improve the

visibility of your vehicle during the day. The

daytime running lamps function is required by

law in Canada. It cannot therefore be

deactivated.
When the engine is running and the vehicle is

stationary: if you move the selector lever from

a drive position to P, the daytime running

lamps/low-beam headlamps go out after

three minutes.
When the engine is running, the vehicle is

stationary and in high ambient light

brightness: if you turn the light switch

to T, you turn on the daytime running

lamps and parking lamps.
If the engine is running and you turn the light

switch to L, the manual settings take

precedence over the daytime running lamps.
USA only:
The daytime running lamps improve the

visibility of your vehicle during the day. To do

this, the daytime running lamps function must

be switched on using the on-board computer

(

Y

page 204).

If the engine is running and you turn the light

switch to T or L, the manual settings

take precedence over the daytime running

lamps.

i

In the USA, the daytime running lamps are

deactivated upon delivery from the factory.

Low-beam headlamps

G

WARNING

If the light switch is set to à and it is foggy,

snowing or there is poor visibility, the low-

beam headlamps will not come on

automatically. This could endanger you and

others. In such situations turn the light switch

to L.
The automatic headlamp feature is only an

aid. The driver is responsible for the vehicle's

lighting at all times.

Even if the light sensor does not detect that

is dark, the parking lamps and low-beam

headlamps switch on when the SmartKey is

inserted into the ignition lock and the light

switch is set to the L position. This is a

particularly useful function in the event of rain

and fog.

X

To switch on the low-beam headlamps:

turn the SmartKey in the ignition lock to

position 2 or start the engine.

X

Turn the light switch to L.

The green L indicator lamp in the

instrument cluster lights up.

Exterior lighting

107

Lights

and

windshiel

dw

iper

s

Z

Advertising