Lights and windshiel dw iper s, Interior lighting – Mercedes-Benz SLK-Class 2013 Owners Manual User Manual

Page 113

Advertising
background image

You can use this function to set the

headlamps to change between low beam and

high beam automatically. The system

recognizes vehicles with their lights on, either

approaching from the opposite direction or

traveling in front of your vehicle, and

consequently switches the headlamps from

high beam to low beam.
The system automatically adapts the low-

beam headlamp range depending on the

distance to the other vehicle. Once the

system no longer detects any other vehicles,

it reactivates the high-beam headlamps.
The system's optical sensor is located behind

the windshield near the overhead control

panel.

Switching Adaptive Highbeam Assist

on/off

X

To activate: activate the Adaptive

Highbeam Assist function using the on-

board computer (

Y

page 204).

X

Turn the light switch to Ã.

X

Press the combination switch beyond the

pressure point in the direction of arrow :

(

Y

page 108).

The _ indicator lamp in the

multifunction display lights up if it is dark

and the light sensor activates the low-beam

headlamps.
If you drive at speeds above approximately

28 mph (45 km/h):
the headlamp range is set automatically

depending on the distance between the

vehicle and other road users.
If you are driving at speeds above

approximately 35 mph (55 km/h) and no

other road users have been detected:
the high-beam headlamps are switched on

automatically. The K indicator lamp in

the instrument cluster also lights up.
If you drive at speeds below approximately

30 mph (45 km/h) or if other road users

are identified or if the roads are sufficiently

illuminated:

the high-beam headlamps are switched off

automatically. The K indicator lamp in

the instrument cluster goes out. The _

indicator lamp in the multifunction display

remains lit.

X

To deactivate: move the combination

switch back to its normal position.

The _ indicator lamp in the instrument

cluster goes out.

Headlamps fogged up on the inside

The headlamps may fog up on the inside if

there is high atmospheric humidity.

X

Switch on the lights and drive off.

The level of fogging diminishes, depending

on the length of the journey and the

weather conditions (humidity and

temperature).

If the level of fogging does not diminish:

X

Have the headlamps checked at a qualified

specialist workshop.

Interior lighting

Overview of interior lighting

Overhead control panel
:

p Switches the left-hand reading lamp

on/off

;

| Switches the automatic interior

lighting control on/off

Interior lighting

111

Lights

and

windshiel

dw

iper

s

Z

Advertising