Mercedes-Benz SLK-Class 2013 Owners Manual - Manual (Page 204)

Activating/deactivating PRE-SAFE ®
Brake
PRE-SAFE ® Brake is only available in vehicles
with DISTRONIC PLUS.
X Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
PRE-SAFE Brake .
X Press the a button.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
When PRE-SAFE ® Brake is activated, the
multifunction display shows the Ä symbol
as long as the HOLD function is not activated
(
Y
page 176).
Vehicles with Parking Guidance: if
PARKTRONIC is activated and you are driving
at a speed 22under 35 km/h, the j Parking
Guidance symbol is shown instead of the
Ä symbol (
Y
page 181).
If the PRE-SAFE Brake: Sensors
Deactivated message appears, the radar
sensor system is deactivated.
X Switch on the radar sensor system
(
Y
page 206).
For more information on PRE-SAFE ® Brake,
see (
Y
page 65).
Activating/deactivating ATTENTION
ASSIST
X Press = or ; on the steering wheel
to select the DriveAssist menu.
X Press the 9 or : button to select
Attention Asst.
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When ATTENTION ASSIST is activated, the
À symbol appears in the multifunction
display when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y
page 184).
Activating/deactivating Blind Spot
Assist
X Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
Blind Spot Asst .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
If the Blind Spot Assist Deactivated
message appears, the radar sensor system is
deactivated.
X
Switch on the radar sensor system
(
Y
page 206).
For further information about Blind Spot
Assist, see (
Y
page 185)
Activating/deactivating Lane Keeping
Assist
X Press = or ; on the steering wheel
to select the DriveAssist menu.
X
Press the 9 or : button to select
Lane Keep. Asst.
X
Press the a button.
The current selection is displayed.
X Press a to confirm.
X Press : or 9 to set Off , Standard
or Adaptive .
X
Press the a button to save the setting.
When Lane Keeping Assist is activated, the
à symbol appears in the multifunction
display when the ignition is on.
For further information about Lane Keeping
Assist, see (
Y
page 187).
202
Menus and submenus
On-board
computer
and
displays