Switching the rear window wiper on/off, Replacing the wiper blades, Lights and windshield wipers – Mercedes-Benz GLK-Class 2012 Owners Manual User Manual

Page 116: Windshield wipers

Advertising
background image

!

If the windshield wipers leave smears on

the windshield after the vehicle has been
washed in an automatic car wash, wax or
other residues may be the reason for this.
Clean the windshield using washer fluid
after washing the vehicle in an automatic
car wash.

Combination switch
1

$ Windshield wipers off

2

Ä Intermittent wipe, low

12

3

Å Intermittent wipe, high

13

4

° Continuous wipe, slow

5

¯ Continuous wipe, fast

B

í Single wipe/ î To wipe the
windshield using washer fluid

X

Switch on the ignition.

X

Turn the combination switch to the
corresponding position.

!

Vehicles with a rain sensor: if the

windshield becomes dirty in dry weather
conditions, the windshield wipers may be
activated inadvertently. This could then
damage the windshield wiper blades or
scratch the windshield.
For this reason, you should always switch
off the windshield wipers in dry weather.

Vehicles with a rain sensor: in the Ä or
Å position, the appropriate wiping
frequency is automatically set according to
the intensity of the rain. In the Å position,
the rain sensor is more sensitive than in

the Ä position, causing the windshield
wipers to wipe more frequently.

Switching the rear window wiper on/

off

Combination switch
:

è Switch

2

ô To wipe with washer fluid

3

I To switch on intermittent wiping

4

0 To switch off intermittent wiping

5

ô To wipe with washer fluid

X

Turn the SmartKey to position

1 or 2 in the

ignition lock.

X

Turn switch : on the combination switch
to the corresponding position.
When the rear window wiper is switched on,
the icon appears in the instrument cluster.

Replacing the wiper blades

Important safety notes

G

WARNING

For safety reasons, switch off the windshield
wipers and remove the key from the ignition
lock before changing the wiper blades
(vehicles with KEYLESS-GO: make sure that
the on-board electronics are in state

0).

Otherwise, the wiper motor could be switched
on suddenly and cause injury.

12

Rain sensor set to low sensitivity.

13

Rain sensor set to high sensitivity.

114

Windshield wipers

Lights and windshield wipers

Advertising