Mercedes-Benz GLK-Class 2012 Owners Manual - Manual (Page 180)

G WARNING
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, move
steering wheel adjustment lever or press one
of the memory position buttons.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Convenience submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Easy Entry/Exit function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Switching the Fold in mirrors when
locking function on/off
This function is only available in Canada.
If you switch on the
Fold Mirrors in when
Locking function, the exterior mirrors fold in
when you lock the vehicle. If you unlock the
vehicle and then open the driver's or front-
passenger door, the exterior mirrors fold out
again.
If you have switched the function on and you
fold the exterior mirrors in using the button
on the door (
Y page 98), they will not fold out
automatically. The exterior mirrors can then
only be folded out using the button on the
door.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Convenience submenu.
X Press the a button to confirm.
X Press the : or 9 to select the Fold
Mirrors in when Locking: function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Resetting to factory settings
For safety reasons, the Daytime Running
Lights: function in the Lights submenu is
only reset when the vehicle is stationary.
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Factory Setting submenu.
X Press the a button to confirm.
The
Reset All Settings? message
appears.
X Press the : or 9 button to select
No or Yes .
X Press the a button to confirm the
selection.
If you select
Yes , the multifunction display
shows a confirmation message.
178
Menus and submenus
On-board computer and displays