Towing the vehicle with the rear axle raised, Towing a vehicle with both axles on the ground, Breakdown assistance – Mercedes-Benz GLK-Class 2012 Owners Manual User Manual

Page 267: Towing and tow-starting

Advertising
background image

Vehicles without the AMG Sports package

Vehicles with the AMG Sports package

X

Press the mark on cover : inwards in the
direction of the arrow.
Rear bumper on vehicles with AMG Sports
package: pry cover : out of the bumper
by inserting a blunt, flat object into the
recess.

X

Take cover : off the opening.

X

Screw the towing eye in clockwise to the
stop and tighten it.

Removing the towing eye

X

Loosen the towing eye and unscrew it.

X

Attach cover : to the bumper and press
until it engages.

X

Place the towing eye in the vehicle tool kit.

Towing the vehicle with the rear axle

raised

Only possible on vehicles without

4MATIC.
When towing your vehicle with the rear axle
raised, it is important that you observe the
safety instructions (

Y

page 264).

!

The ignition must be switched off if you

are towing the vehicle with the rear axle
raised. Intervention by ESP

®

could

otherwise damage the brake system.

X

Switch on the hazard warning lamps
(

Y

page 105).

X

Turn the SmartKey to position

0 in the

ignition lock and remove the SmartKey
from the ignition lock.

X

When leaving the vehicle, take the
SmartKey or the KEYLESS-GO key with you.

Towing a vehicle with both axles on

the ground

When having your vehicle towed, observe the
important safety notes (

Y

page 264).

G

WARNING

The power assistance for the steering and the
brake force booster do not work when the
engine is not running. You will then need
much more effort to brake and steer the
vehicle. Adapt your style of driving
accordingly.

X

Switch on the hazard warning lamps
(

Y

page 105).

i

When towing with the hazard warning

lamps switched on, use the combination
switch as usual to signal a change of
direction. In this case, only the turn signals
for the desired direction flash. When the
combination switch is reset, the hazard
warning lamps start flashing again.

X

Turn the SmartKey to position

2 in the

ignition lock.

Towing and tow-starting

265

Breakdown assistance

Z

Advertising