Mercedes-Benz E-Coupe 2011 Owners Manual - Manual (Page 210)

When ATTENTION ASSIST ( Y page 193) is
activated, the À symbol appears in the
multifunction display when the ignition is on.
Activating/deactivating Blind Spot
Assist
You can use the Blind Spot Asst. function
to activate or deactivate Blind Spot Assist
(
Y page 194).
X Press the = or ; button on the
steering wheel to select the
DriveAssist
menu.
X Press the 9 or : button to select
Blind Spot Asst..
X Press a.
The current selection is displayed.
X To activate/deactivate: press a
again.
Maintenance menu
In the Serv. menu, you can:
R call up display messages ( Y page 213)
R restart the tire pressure loss warning
system (Canada only) (
Y page 309)
R
check the tire pressure electronically (USA
only) (
Y page 311)
R call up the service due date ( Y page 277)
Settings menu
Introduction
In the Settings menu, you have the following
options:
R
Changing the instrument cluster settings
R
Changing the lighting settings
R Changing the vehicle settings
R Changing the convenience settings
R
Restoring the factory settings
Instrument cluster
Selecting the unit of measurement for
distance
The
Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in km/h or mph.
The selected unit of measurement for
distance applies to:
R the digital speedometer in the Trip menu
R
the odometer and the trip odometer
R
the trip computer
R the navigation instructions in the Navi
menu
R
DISTRONIC PLUS
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
208
Menus and submenus
On-board computer and displays
BA 207 USA, CA Edition B 2011; 1; 3, en-US
d2sboike
Version: 3.0.3.6
2010-05-20T10:38:09+02:00 - Seite 208