Mercedes-Benz E-Coupe 2011 Owners Manual - Manual (Page 211)

X Press the : or 9 button to select the
Display Unit Speed-/Odometer.
function.
You will see the selected setting:
km or
miles.
X Press the a button to save the setting.
Selecting the permanent display function
The
Permanent Display: function allows
you to choose whether the multifunction
display always shows the outside
temperature or the speed in km/h (USA) or
mph (Canada).
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
X Press : or 9 to select the
Permanent Display: function.
You will see the selected setting
Outside
Temperature or Speedometer [km/h]:.
X Press the a button to save the setting.
Lights
Switching the daytime running lamps on/
off
This function is not available in Canada.
If you have activated the
Daytime Running
Lights: function and the light switch is in the
c position the daytime running lamps are
switched on automatically when the engine is
running.
In the dark, the following also light up:
R
the low-beam headlamps
R the parking lamps
R the tail lamps
R
the license plate lamp
R
the side marker lamps
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Daytime Running Lights: function.
You will see the selected setting:
Enabled
or Disabled.
X Press the a button to save the setting.
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the
Settings
menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Adaptive Highbeam Assist: function.
You will see the selected setting:
Enabled
or Disabled.
X Press the a button to save the setting.
Activating/deactivating surround
lighting and exterior lighting delayed
switch-off
If you switch on the
Locator Lighting:
function and the light switch is set to c,
R the exterior lighting switches on when it is
dark after unlocking the vehicle with the
SmartKey.
The exterior lighting switches off when you
open the driver’s door.
R the exterior lighting remains on for 15
seconds when it is dark after closing the
doors.
If the engine is switched off and then none
of the doors are opened, or if an open door
is not closed, the exterior lighting goes out
after 60 seconds.
Menus and submenus
209
On-board computer and displays
BA 207 USA, CA Edition B 2011; 1; 3, en-US
d2sboike
Version: 3.0.3.6
2010-05-20T10:38:09+02:00 - Seite 209
Z