Mercedes-Benz CL-Class 2009 - Manual (Page 317)

Memory function
315
R Lumbar support (CL 550 4MATIC)
R Drive-dynamic multicontour seat:
activation/deactivation
M Memory button
1, 2, 3 Memory position button
Storing positions into memory
X Adjust the seats.
X On the driver’s side, additionally adjust the
steering wheel and exterior rear view
mirrors to the desired positions.
X Press memory button M.
X Release memory button M and press
memory position button 1, 2 or 3 within
3 seconds.
When the settings are stored to the
selected position, an acknowledgement
signal sounds.
Recalling positions from memory
X Press and hold desired memory position
button
1, 2 or 3 until the seat has
completely moved to the stored position.
On the driver’s side, also wait for the
steering wheel and exterior rear view
mirrors to move to the stored position.
i Releasing the memory position button
stops movement to the stored positions
immediately.
The multicontour seat and/or lumbar
support (CL 550 4MATIC) will continue to
be adjusted.
Storing exterior rear view mirror
parking position
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as soon
as you engage reverse gear
R.
For information on activating the parking
position, see (
Y page 313).
1 Memory button M
2 Adjustment button
3 Passenger side exterior rear view mirror
button
4 Driver’s side exterior rear view mirror
button
X Stop the vehicle.
X Switch on the ignition.
Controls in detail
Z