Mercedes-Benz CL-Class 2009 - Manual (Page 548)

Replacing wiper blades
546
Vehicles with SmartKey
X Turn the SmartKey in the starter switch to
position
1.
X Turn combination switch to wiper setting
u .
X With wiper arms in vertical position, turn
the SmartKey in the starter switch to
position
0.
X Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO
X Make sure the vehicle’s on-board
electronics have status
1.
X Turn combination switch to wiper setting
u .
X Press KEYLESS-GO start/stop button
repeatedly until windshield wipers start.
X Press KEYLESS-GO start/stop button when
the wiper arms are in a vertical position.
Removing wiper blades
! Do not pull on the wiper blade inserts.
They could tear.
X Fold the wiper arm forward until it snaps
into place.
1 Turning wiper blade
2 Removing
X Turn the wiper blade in direction of arrow
1 .
X Slide the wiper blade sideways out of the
retainer in the direction of arrow
2 .
Installing wiper blades
X Slide the wiper blade onto wiper arm until
it locks in place.
X Rotate the wiper blade into position parallel
to the wiper arm.
X Fold the wiper arm backward to rest on the
windshield.
Make sure you hold on to the wiper when
folding the wiper arm back.
! Make sure the wiper blades are properly
installed. Improperly installed wiper blades
may cause windshield damage.
Practical hints