Hazard warning flasher, Controls in detail – Mercedes-Benz SL-Class 2009 Owners Manual User Manual
Page 104
Lighting
102
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow
2
.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow
1
or
2
.
The corresponding turn signal indicator
lamp
L
or
K
in the instrument clus-
ter flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.
The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch or with the
SmartKey with KEYLESS-GO removed from
the vehicle.
The hazard warning flasher comes on auto-
matically when an air bag deploys.
The hazard warning flasher switch is located
on the upper part of the center console.
1
Hazard warning flasher switch
X
Switching on: Press hazard warning
flasher switch
1
.
All turn signal lamps are flashing.
i
With the hazard warning flasher activated
and the combination switch set for either
left or right turn, only the respective left or
right turn signals will operate when the igni-
tion is switched on.
X
Switching off: Press hazard warning
flasher switch
1
again.
i
If the hazard warning flasher has been
activated automatically, press hazard
warning flasher switch
1
once to switch
off.
Controls in detail