Practical hints – Mercedes-Benz SL-Class 2009 Owners Manual User Manual

Page 326

Advertising
background image

Flat tire

324

the electric air pump back in its designated
storage space.

X

Version 2 only: Store electrical plug

3

and the air hose back into the pump hous-
ing bottom.

X

Place the electric air pump back in its des-
ignated storage space.

X

Lower the vehicle.

Lowering the vehicle

G Warning!

Inflate collapsible tire only after the wheel
is properly attached.
Inflate the collapsible tire using the electric
air pump before lowering the vehicle.

X

Lower the vehicle by turning crank coun-
terclockwise until the vehicle is resting fully
on its own weight.

X

Pull the jack out of the jack support tube.

1 – 5

Wheel bolts

X

Tighten the five wheel bolts evenly, follow-
ing the diagonal sequence illustrated (

1

to

5

), until all bolts are tight. Observe a tight-

ening torque of 96 lb-ft (130 Nm).

G Warning!

Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque
of 96 lb-ft (130 Nm).

G Warning!

When turning the wheel wrench to tighten
the wheel bolts, make sure you position
your hands on the wrench in such a way
that you avoid injury to yourself, such as
scraping your hands against the wheel.

Make sure turning the wheel wrench will
not scratch or damage the wheel rim.

X

Before storing the jack in the trunk, crank
back to storage position and fold in the jack
arm.

X

Store the jack and the other vehicle tools
in the designated storage space.

For information on storing the spare wheel in
the trunk after it has been replaced by a reg-
ular road wheel, see (

Y

page 253).

i

The flat tire may be transported in the

trunk when the retractable hardtop is
closed. If available use a protective wrap on
the spare wheel.

i

Vehicles with TPMS or Advanced TPMS:

Do not restart the tire inflation pressure
monitor until a full size wheel/tire with
functioning sensor has been placed back
into service on the vehicle.

Replacing jack support tube cover

X

Slide tongue of cover under the upper edge
of the tube opening.

X

Applying even pressure, press cover until it
snaps into place.

Practical hints

Advertising