Mercedes-Benz M-Class 2008 Owners Manual - Manual (Page 179)

178
Controls in detail
Control system
DSR (Downhill Speed Regulation)
programmed default speed
In the DSR menu, you can program the
default speed the DSR is set to when it is
activated.
You can program the default speed be-
tween 4-10 mph (Canada: 6-18 km/h).
The set value is increased in 1 mph
(Canada: 2 km/h) increments.
̈ Press button è or ÿ repeatedly
until the message DSR Speed appears
in the multifunction display.
The selection marker is on the current
setting.
̈ Press button æ or ç repeatedly
until the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use
the programmed default speed to regu-
late the vehicle’s speed.
Trip computer menu
Use the trip computer menu to call up
statistical data on your vehicle.
The following information is available:
i Once DSR is switched on, you can adjust the
set speed using the cruise control lever
(
୴ page 251).
Function Page
Fuel consumption statistics
since start 179
Fuel consumption statistics
since last reset 179
Resetting fuel consumption
statistics 179
Distance to empty 180
i
When you enter the trip computer menu, you
will always see the fuel consumption statistics
since start first.