Mercedes-Benz M-Class 2008 Owners Manual - Manual (Page 273)

272
Controls in detail
Loading
Installing blind
̈ Place left side of blind 2 in left mount.
̈ Position right side of blind 2 over right
mount.
̈ Press release button 1 and guide
cover 2 into mount.
̈ Make sure the cargo compartment
cover blind is securely fastened.
Removing blind
1 Release button
2 Blind
̈ Roll the blind up ( ୴ page 271).
̈ Push release button 1.
̈ Pull blind 2 to the left against the
spring pressure until the spring in the
cover audibly engages.
̈ Remove the blind.
Cargo net*
i Before installing cargo compartment cover
blind behind the front seats, fold the rear seats
forward.
i Before removing cargo compartment cover
blind behind the rear seats, fold the left or right
rear seat forward. Afterwards, return the left or
right rear seat into its original position.
Warning!
G
Make sure the cargo net is properly engaged
at top and bottom position and the tighten-
ing belts are securely fastened.
Never use a damaged cargo net.
To help avoid personal injury from smaller
objects being thrown around in the occu-
pant compartment during a collision or sud-
den maneuver, always use cargo net when
transporting cargo.
The cargo net cannot prevent the movement
of large, heavier objects into the passenger
compartment in an accident. Such items
must be properly secured using the cargo
tie-down rings ( ୴ page 268) in the cargo
compartment floor.
Passenger use of seats behind installed
cargo net is restricted because of the
footwell being taken up by the net.