Mercedes-Benz M-Class 2008 Owners Manual User Manual
Page 485
484
Practical hints
Flat tire
Mounting the new wheel
1 Wheel bolt for 18", 19" and 20" light
alloy wheels and collapsible tire (AMG
vehicles)
2 Wheel bolt for 17" light alloy wheels or
Minispare wheel (located in vehicle tool
kit (
̈
Clean contact surfaces of wheel and
wheel hub.
̈
Guide spare wheel onto the alignment
bolt and push it on the wheel hub.
̈
Insert wheel bolts and tighten them
slightly.
̈
Unscrew the alignment bolt, install last
wheel bolt and tighten slightly.
!
Wheel bolts
2 must be used when mount-
ing 17" light alloy rims or the Minispare wheel.
The use of any wheel bolts other than wheel
bolts
2 for 17" light alloy rims or the Minispare
wheel will damage the vehicle’s brakes.
!
To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Warning!
G
Always replace wheel bolts that are
damaged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be
repaired immediately. Do not continue to
drive under these circumstances! Contact
an authorized Mercedes-Benz Light Truck
Center or call Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure to use the correct wheel bolts.
Warning!
G
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the
vehicle is raised. Otherwise the vehicle
could fall off the jack.