Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 422)

421
Practical hints
Where will I find ...?
1 Tab
2 Removing
3 Vehicle tool kit, jack and collapsible
wheel chock
4 Opening
5 Tab
6 Luggage bowl
̈ Removing: Lift up trunk floor cover
and engage trunk floor handle in upper
edge of trunk.
̈ Pull tab 1 in direction of arrow 2 and
lift up vehicle tool kit 3.
You can now remove the vehicle tool
kit
3 from luggage bowl 6.
̈ Opening: Pull tab 5 in direction of
arrow 4 and open the vehicle tool kit
cover.
You can now remove the tools and
accessories from vehicle tool kit
3.
̈ Closing: Store the tools and
accessories in vehicle tool kit
3.
̈ Press the vehicle tool kit cover down
until it engage.
̈ Installing: Slide the vehicle tool kit 3
into the recess in luggage bowl 6.
̈ Press vehicle tool kit 3 down until
tab 1 engage in luggage bowl 6.
̈ Disengage trunk floor handle from up-
per edge of trunk and lower trunk floor.
Vehicle jack
!
To prevent damage, always disengage trunk
floor handle from trunk lid and lower trunk floor
before closing the trunk.
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly depress the parking brake and block
wheels before raising vehicle with jack.
Do not release the parking brake while the
vehicle is raised. Be certain that the jack is
always vertical (plumb line) when in use,
especially on hills. Always try to use the jack
on level surface. Make sure the jack arm is
fully seated in the jack take-up bracket.
Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle. ୴୴