Mercedes-Benz C-Class 2008 Owners Manual - Manual (Page 88)

87
Controls in detail
Seats
If it is not possible to adjust the seat with
the seat adjustment switch:
̈ Insert the SmartKey or the
KEYLESS-GO start/stop button*
(Canada only) into the starter switch.
or
̈ With SmartKey or KEYLESS-GO*
(Canada only) in starter switch
position 0. Turn the SmartKey in
starter switch to position 1 or press
the KEYLESS-GO start/stop button*
(Canada only) once.
or
̈ Open the driver’s or front passenger
door.
̈ Seat cushion tilt: Press the switch up
or down in the direction of
arrow
1 until your upper legs are
lightly supported.
̈ Seat height: Press the switch up or
down in the direction of arrow
2.
̈ Seat fore and aft: Press the switch for-
ward or backward in the direction of
arrow
3.
̈ Seat backrest tilt: Press the switch
forward or backward in the direction of
arrow
4.
Adjusting front seat head restraints
You cannot remove the active head re-
straint on the driver’s and front passen-
ger’s seat.
For removal contact an authorized
Mercedes-Benz Center.
For information on active head restraints,
see “Active head restraints” (
୴ page 50).
i Canada only:
The memory function* ( ୴ page 102) lets you
store the settings for the seat positions together
with the settings for the steering wheel and the
exterior rear view mirrors.
! When moving the seat, make sure there are
no items in the footwell or behind the seats. Oth-
erwise you could damage the seats.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.