Brake lamp:replacing bulbs, Replacing bulbs for rear lamps – Mercedes-Benz C-Class 2008 Owners Manual User Manual
Page 437
![background image](/manuals/638609/437/background.png)
436
Practical hints
Replacing bulbs
Front turn signal lamp bulb
1 Mark
2 Handle
3 Bulb socket
̈
Turn bulb socket
3 with handle 2
counterclockwise and remove it.
̈
Press gently onto the bulb and turn
counterclockwise out of bulb
socket
3.
̈
Press the new bulb gently into bulb
socket
3 and turn clockwise until it
engages.
̈
Place bulb socket
3 back into the
lamp. Handle
2 must be in a horizon-
tal line and mark
1 is on the upper
part.
̈
Turn bulb socket
3 clockwise until it
engage.
Parking and standing lamp bulb
̈
Turn housing cover
2 or 3 counter-
clockwise and remove it.
̈
Pull out bulb socket
6 with the bulb.
̈
Pull the bulb out of the bulb socket
6.
̈
Press the new bulb into bulb socket
6.
̈
Press bulb socket
6 back into the
lamp.
̈
Align housing cover
2 or 3 and turn
it clockwise.
Additional turn signal lamps
The additional turn signal lamps in the ex-
terior rear view mirrors have LEDs.
If a malfunction occurs or LEDs fail to func-
tion, the entire turn signal unit must be re-
placed. Have the additional turn signal unit
replaced at an authorized Mercedes-Benz
Center.
Front side marker lamp
Since replacing the side marker lamp bulbs
is a technically highly demanding process,
we recommend you have the side marker
lamp bulbs replaced at an authorized
Mercedes-Benz Center.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
̈
Turn the exterior lamp switch to
position
M (