Mercedes-Benz E-Wagon 2007 Owners Manual User Manual
Page 131

130
Controls in detail
Seats
Head restraint tilt
(rear outer seats only)
Two different head restraint angle
positions are available.
1 Release button
̈
Press the release button
1 and tilt the
head restraint to the desired position.
Removing and installing rear seat head
restraints
1 Release button
Removing rear seat head restraints
̈
Placing head restraints upright
(
̈
Pull head restraint to its highest
position.
̈
Push release button
1 and pull out
head restraint.
Installing rear seat head restraints
̈
Insert head restraint and push it down
until it engages.
̈
Push button
1 and adjust head
restraint to desired position.
i
When installing the head restraints, make
sure that:
ț
The proper head restraint for each seat is in-
stalled. The bars of the head restraint de-
signed for the middle rear seat are of even
length and shorter than those designed for
use on the outer rear seats.
ț
The head restraints engage fully.