Mercedes-Benz E-Wagon 2006 Owners Manual - Manual (Page 115)

114
Controls in detail
Locking and unlocking
ț If the SmartKey with KEYLESS-GO is re-
moved from the vehicle while the igni-
tion is switched on (e.g. if passenger
exits the vehicle with the SmartKey
with KEYLESS-GO), the message
Key
not recognized will appear in the mul-
tifunction display while driving off.
Find the SmartKey or change its
present location immediately (e.g.
place it on the front passenger seat or
insert it in shirt pocket).
ț Remember that the engine can be
started by anyone with a SmartKey
with KEYLESS-GO that is left inside the
vehicle. If you leave the SmartKey with
KEYLESS-GO behind when exiting and
locking the vehicle, the message
Key
still in vehicle will appear in the
multifunction display.
Factory setting Global unlocking
̈ Pull an outside door handle.
ț All turn signal lamps flash once.
ț An acoustic signal sounds once (if
equipped and feature activated).
ț The locking knobs in the doors
move up.
ț The anti-theft alarm system is dis-
armed.
The vehicle will lock again automatically
and reactivate the anti-theft alarm system
within approximately 40 seconds if:
ț neither a door nor the tailgate is
opened
ț the central locking switch is not acti-
vated
i
Your vehicle may be equipped with an
acoustic lock and unlock confirmation
signal feature. If your vehicle is
equipped with this feature and the fea-
ture is activated, an acoustic signal will
sound when the vehicle is locked or un-
locked using the SmartKey with
KEYLESS-GO.
To determine whether or not your vehi-
cle is equipped with this feature,
contact an authorized Mercedes-Benz
Center. If equipped and you wish to ac-
tivate or deactivate the feature, or ad-
just its signal volume, also contact an
authorized Mercedes-Benz Center.