Mercedes-Benz E-Wagon 2006 Owners Manual - Manual (Page 133)

132
Controls in detail
Seats
Removing and installing rear seat head
restraints
1 Release button
Removing rear seat head restraints
̈ Fold back head restraint ( ୴ page 129).
̈ Pull head restraint to its highest
position.
̈ Push release button 1 and pull out
head restraint.
Installing rear seat head restraints
̈ Insert head restraint and push it down
until it engages.
̈ Push button 1 and adjust head
restraint to desired position.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
!
When installing the head restraints,
make sure that:
ț The proper head restraint for each
seat is installed. The bars of the
head restraint designed for the mid-
dle rear seat are of even length and
shorter than those designed for use
on the outer rear seats.
ț The head restraints engage fully.