Mercedes-Benz E-Wagon 2006 Owners Manual - Manual (Page 270)

269
Controls in detail
Loading
Installing the storage box
̈ Fold rear seat backrests forward
(
୴ page 260).
̈ Insert storage box from behind into
cargo compartment with the opening
pointing in direction of travel.
̈ Press locking hooks of storage box into
the space between the rear seat back-
rest and the cargo compartment.
̈ Fold rear seat backrest to the rear
(
୴ page 261).
Loading the storage box
̈ Fold rear seat backrests forward
(
୴ page 260).
̈ Fill storage box with cargo through the
opening on the front side.
̈ Fold rear seat backrest to the rear
(
୴ page 261).
Removing the storage box
̈ Fold rear seat backrests forward
(
୴ page 260).
̈ Slide locking hooks of storage box for-
ward out of the retainers.
̈ Pull storage box to the rear and remove
it from cargo compartment.
̈ Fold rear seat backrest to the rear
(
୴ page 261).
Twin roller blind
The twin roller blind contains a cargo net
and a cargo compartment cover.
It is located on the seat backrest of the
rear bench seat.
Cargo net
i
The storage box is additionally held in
place from above by the twin roller
blind.
i
The storage box in the cargo compart-
ment is covered by the rear bench seat
and can hold a maximum of 44 lbs
(20 kg) cargo.
Warning!
G
The cargo net cannot hold back heavy loads.
The transported load should therefore al-
ways be tied down.
Objects which are insufficiently secured
could otherwise injure you if they are thrown
around in the event of an accident, during
hard braking or steering maneuvers.