Mercedes-Benz CLK-Class 2006 Owners Manual - Manual (Page 450)

449
Practical hints
Flat tire
Removing the wheel
1 Alignment bolt
̈ Unscrew upper-most wheel bolt and
remove.
̈ Replace this wheel bolt with alignment
bolt
1 supplied in the tool kit.
̈ Remove the remaining bolts.
̈ Remove the wheel.
Mounting the spare wheel
1 Wheel bolt for light alloy rims
2 Wheel bolt for Minispare wheel
(located in trunk with Minispare wheel)
̈ Clean contact surfaces of wheel and
wheel hub.
!
Do not place wheel bolts in sand or dirt.
This could result in damage to the bolt
and wheel hub threads.
!
Wheel bolts 2 must be used when
mounting the Minispare wheel, or other
steel rims. The use of any wheel bolts
other than wheel bolts
2 for the
Minispare wheel will physically damage
the vehicle’s brakes.
!
To avoid paint damage, place wheel flat
against hub and hold it there while in-
stalling first wheel bolt.