Battery, vehicle:charging, Battery, vehicle:connecting – Mercedes-Benz CLK-Class 2006 Owners Manual User Manual

Page 456

Advertising
background image

455

Practical hints

Battery

Charging and reinstalling the battery

̈

Charge battery in accordance with the
instructions of the battery charger
manufacturer.

̈

Reinstall the charged battery. Follow
the previously described steps in
reverse order.

Reconnecting the battery

̈

Turn off all electrical consumers.

̈

Remove SmartKey from starter switch.

Vehicles with KEYLESS-GO*:

̈

Press the start/stop button until
the engine shuts off.

̈

Open the driver’s door.

̈

Connect the battery positive lead and
fasten its cover

3.

̈

Connect the battery negative lead

2.

̈

Reinstall the filter box (

page 453).

Batteries contain materials that can harm
the environment if disposed of improperly.
Large 12-volt storage batteries contain
lead. Recycling of batteries is the preferred
method of disposal. Many states require
sellers of batteries to accept old batteries
for recycling.

Warning!

G

Never charge a battery while still installed in

the vehicle unless the accessory battery

charge unit* approved by Mercedes-Benz is

being used. Gases may escape during charg-

ing and cause explosions that may result in

paint damage, corrosion or personal injury.

An accessory battery charge unit* specially

adapted for Mercedes-Benz vehicles and

tested and approved by Mercedes-Benz is

available, permitting the charging of the bat-

tery in its installed position. Contact an au-

thorized Mercedes-Benz Center for

information and availability. Charge battery

in accordance with the separate instruc-

tions for the accessory battery charger*.

!

The battery, its filler caps and the vent
tube must always be securely installed
when the vehicle is in operation.

!

NEVER invert the terminal connections!

i

The following procedures must be
carried out following any interruption of
battery power (e.g. due to reconnect-
ing):

ț

Set the clock (

page 153).

Vehicles with COMAND*:
see COMAND operator’s manual.

ț

Synchronize the side windows
(

page 251).

Advertising