QOMO QIR300 User Manual - Manual (Page 84)

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com 84
3.5.1 System:
The System settings contain audio settings and the instructor remote control mouse sensitivity
settings (This function is not available in this system).
The audio setup allows the selection of sounds to be used when entering a quiz, starting a quiz, and
completing a quiz.
To set up the audio sounds, follow these steps:
1. Select Settings Tab.
2. Click the System icon; this will display the System Settings window.
3. Click on the sound activity check boxes you desire and the Browse … button will be
displayed. Click the Browse button; this will display the sound file browser. Select the
desired sound file for the activity and then click the Save button to save it into the system.
4. Repeat step 3, if you desire to set up additional sounds for other activities.
Note: If the check box is unchecked, the sound will be muted for that activity.
3.5.2 Remote ID:
The function is used to set up the student remote keypad device ID. All settings require the user to
log in the system to perform.
3.5.2.1 Student ID
There are two ways to set up the student device ID.
1. Click the Set button to set up the student device ID.
To set the student device ID, follow these steps: