QOMO QIR300 User Manual - Manual (Page 86)

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com 86
3.5.2.2 Test
You can click the Test button in the students tab or click the Hardware under Settings
window to test the student remote keypad stroke.
To use the hardware test tool, follow these steps:
1. Click the Hardware button to display the Hardware test window.
2. Press a key on the student keypad; the key result will display on the corresponding ID row.
(This test can only test one student keypad for a time.)
3. Press a key on the instructor keypad; the result will display on the teacher’s key grid.
You may press the Reset button to clear the test results; press the OK
button to close the test window.
3.5.3 Hardware test:
You can click the Hardware under Settings window to test the student remote keypad stroke.
To use the hardware test tool, follow these steps:
1. Click the Hardware button to display the Hardware test window.
2. Press a key on the student keypad; the key result will display on the corresponding ID row.
(This test can only test one student keypad for a time.)