QOMO QD3300 - Manual (Page 16)

16
Click “Capture” — > “Start Capture”, input the file name in dialog box, or
click icon on the toolbar, then input the file name in dialog box. If you
want to set the time limit for the capture, select “Capture” ->“Set Time
Limit“ to set the time limit. Click “Start Capture” to start capture, and click
“Stop Capture” or
icon on the toolbar to stop capture. (If you have set
the time limit, it will stop automatically when the time is up.) The video file is
AVI format.
C. Set the Frame Rate
Click [Capture] -> [Set Frame Rate], and click open “Choose Frame Rate”
to set the frame rate.
D. Set Time Limit
Click [Capture] -> [Set Time Limit] to set the time limit while capturing
video.
E. Note:
Do not connect / disconnect the USB cable when the application is running,
which will cause the program to be interrupted.
CONTROLLING VISUALIZER BY COMPUTER
You can control the visualizer from a computer connected with a RS232
connector.
A. Connect the computer and the visualizer using the RS232 cable.
B. Double click X:\ 232 Control\Control Panel
(you can open this file from
the CD and double click it, or copy this file to any directory on your
computer’s hard drive and double click to launch it).
CONTROLLING PROJECTOR BY VISUALIZER
The code writing software is used to inputting projector’s control code, then