QOMO QD3300 - Manual (Page 20)

20
Click the projector control buttons on the visualizer’s operating panel to
check if the control code that the program received is the same as the
sending code. If the receiving code is same to the sending code, the input
codes are correct. If the visualizer can not control the projector, please do
the following.
1. Check to see if the source control codes of projector are correct.
2. Check to make sure the connection between the visualizer and the
projector is correct.
FOLDING THE UNIT
1. Fold the right arm light down first onto the base, then the left arm down.
Rotate the camera head clockwise until the camera head is parallel to the
camera stand.