QOMO QD1600 - Manual (Page 11)

connections shown below to control the visualizer from an external
computer.
USB connection enables capturing still images / video streams from
the visualizer to the computer. Special software is required for this
operation.
4. Turn on the power by pressing the “POWER” button.
OUTPUT MODE AND VERTICAL FREQUENCY (60Hz)
The RGB output can output a signal in the SVGA /XGA format.
In order to achieve the best picture quality you must set the outputs of the
Visualizer to match the native resolution of your display unit.
PAL/NTSC VIDEO OUTPUTS
The S-Video and composite video outputs are set to NTSC (PAL) during
manufacturing.
INSTALLING VISUALIZER SOFTWARE
This function is to snap and display images with the USB interface, which
includes displaying static and dynamic pictures, snapping dynamic images
and playback the dynamic images with the media player in Windows XP.
A. Connect the computer and visualizer with the USB cable. Insert the
software CD that comes with your purchased visualizer into the
CD-ROM drive. Turn on the visualizer. The setup will run automatically
on your system, and then the Software Setup window will appear as
below.
11