Working on the stage, Working outside the stage, Light – QOMO QD1600 User Manual
Page 14
WORKING ON THE STAGE
1. Place your material on the working surface.
2. Select the enlargement required with the “
+
T
” and “
W
” keys.
3. Adjust the focus with the “Near” and “Far” keys or “AUTO” key.
WORKING OUTSIDE THE STAGE
For showing 3-dimensional objects with the visualizer, just place them on
the working surface and adjust the “
+
T
” or “
W
” and “AUTO” keys. If the
object is too big for the stage or you want to show it from the side, just
place it behind or in front of the unit and tilt the camera by hand (please
take off the close-up lens first).]
LIGHT
The arm lights are on when the power is on. Each time you press the
“LAMP” buttons, the lighting changes as below.
The arm lights turn on
The back light turns on
All the lights turn off
Rotate 330 degrees
vertically
14