QOMO QD1600 - Manual (Page 16)

FREEZING IMAGE
Press the “Frz” button to freeze the image. When the output signal is RGB,
in order to show a still image on the screen, press the “Frz” button. The
frozen image can’t be adjusted (Zoom in/out, color adjustment, etc.).
BRIGHTNESS ADJUSTMENT
If the image effect is not satisfactory, you can adjust the brightness to get a
better image effect. Use the “BRIGHT +” or “BRIGHT -” button to adjust the
brightness. To increase the brightness, press the “BRIGHT +” button. To
decrease it, press the “BRIGHT -” button. To go back to the initial
brightness press the “AUTO” button.
WHITE BALANCE ADJUSTMENT
Each time the lighting condition changes, the user should adjust the white
balance of the CCD.
Press the “AUTO” button to adjust the white balance automatically.
AUTO ADJUSTMENT
One of the Visualizer’s special functions is auto adjustment. Press the
“AUTO” button to auto adjust the brightness, the white balance and the
focus.
TEXT/IMAGE MODE
Press the “Text” button to switch between image/text modes. To display a
text file, switch to the text mode to get a clearer text effect.
COLOR AND B&W MODE SWITCH
Press “B&W” once to enter the Black & White mode; press again to return
to the Color mode. (On the remote control)
SWITCHABLE VIDEO INPUTS
Press the “VIDEO” button to switch among S-Video and Video signals.
16