QOMO QRF300 - Manual (Page 66)

Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com 66
Note: If the check box is unchecked, the sound will be muted for that activity.
2.4.2 Remote ID:
The function is used to set up the student remote keypad device ID. All settings require the user to
log in the system to perform.
2.4.2.1 Students
Student ID
There are two ways to set up the student device ID.
1. Click the Set button to set up the student device ID.
To set the student device ID, follow these steps:
1) From the main QClick window, select Settings tab, then click Remote ID to display
the Set Remote ID window. The default shows the Students tab.
2) Enter the remote ID number into the text box under New ID: on the right by directly
typing or clicking the digital up or down buttons next to the box.
3) Press and hold the key „B‟ and then press the key „Rush Quiz‟ on the student keypad.
4) After the red indication light start flashing, release both keys at the same time.
5) Click the Set button to set the new ID you have entered.