Teacher, 2 teacher – QOMO QRF300 User Manual
Page 68
Advertising
Copyright © 2009 All Rights Reserved by QOMO HiteVision.
www.qomo.com
68
2.4.2.2 Teacher
To reset the instructor remote keypad, follow these steps:
1. From the main QClick window, select Settings tab, then click Remote ID to display the Set
Remote ID window.
2. Select the Teacher tab.
3. Press and hold the key „Start‟ and then press the key „OK‟ on the instructor keypad.
4. After the red indication light is flashing, release both keys at the same time.
5. Click the Set
button to set the new ID.
Note: Setting the new ID means that the instructor keypad would match the currently plugged in
main receiver channel.
Advertising