Rice Lake 420 Plus HMI Digital Weight Indicator Installation Manual - Manual (Page 16)

12 420 Plus Installation Manual
2.7 Replacement Parts
Table 2-6 lists replacement parts for the
420 Plus
, including all parts referenced in Figures 2-8 and 2-9.
Table 2-6. Replacement Parts
Ref
Number PN Description (Quantity) Figure
1 14862 Screws 8-32NC x 3/8 (8) Figure 2-9 14
2 45042 Sealing washers (8)
3 84387 Backplate (1)
4 84388 backplate gasket (1)
5 14839 Screws 6-32NC x 1/4 (9)
6 85123 CPU and display board assembly (1)
7 84386 Enclosure (1)
8 15144 Nylon washers 1/4x1x1/16 (2)
9 68403 Four-cornered wing knobs for tilt stand (2)
10 29635 Tilt stand (1)
11 44676 Sealing washer (1)
12 42640 Screws 1/4-28NF X 1/4 (2)
13 19538 Cable grip plugs (2)
14 15626 Cable grips (3)
15 30375 Nylon seal rings for cable grips (3)
16 85202 Power cord assembly – 115 VAC
85203 Power cord assembly – 220 VAC
17 84389 Power supply bracket (1)
18 76556 Power supply switch (1)
85554 Power supply, DC/DC converter
20 84397 Overlay panel (1) Figure 2-8 13
21 68216 Rice Lake nameplate (1)
22 85151 Power supply ribbon cable(1)
23 16892 Earth ground label (1)
24 15134 Lock washer, No 8, Type A (3)
25 45043 Ground wire 4 in, No. 8 (1)
27 14626 Kep nuts, 8-32NC Hex (5)
28 15627 Locknuts (3)
30 85494 Protective cover (1) Figure 2-9 14
32 15376 Standoffs, male - female (6)
85791 Fuse, 2.5 Amp 5x20mm