Rice Lake CLS-920i Cargo Lift Scale Installation Manual - Manual (Page 16)

Illustration shown is
with part of the
flexure removed to
show shim bolt
location.
Scale carriage
Shim bolts
Bottom
cleat
retaining
bolts
Bottom cleat
Insert a feeler gauge to
measure a .020 inch
thickness between bottom
cleat and scale carriage.
12 CLS-920i Installation Manual
Figure 2-5. Bottom Cleat Location and Assembly
15. Now reattach the forklift tines to the scale assembly by attaching them in the center of the scale and sliding
them off to the sides.