8 servicing/repairs/cleaning, 1 servicing, 1 replace the bellow – Rice Lake Contego-Hygienic Weigh Module Kits, Lateral Cable Outlet User Manual
Page 28: Servicing/repairs/cleaning, Servicing, Replace the bellow, 8servicing/repairs/cleaning
Advertising
Hygienic Weighing Module Contego®
Installation Manual
EN-26
Sartorius
8
Servicing/Repairs/Cleaning
8.1
Servicing
8.1.1
Replace the Bellow
Warning:
The vessel may turn over during mounting.
Securing the vessel against tipping is imperative.
Procedure
• Remove a defective bellow (not shown) and discard it according to the local regulations.
• Release and remove the bolts (7).
• Fold the stopper (6) onto the bottom plate and withdraw it sideways together with the film.
• Release and remove the bolts (1).
• Release the locknut (4) and screw the bolt of the lift-off protector (3) at the hex (2) into the threaded
bush (5).
• Release and remove the threaded bush (secured with Loctite) with the complete lift-off protector (3).
Advertising