0 sequence of operation – Rice Lake DWM-IV Digital Weighmeter Model 5 User Manual
Page 20
5.0 Sequence of Operation
1.
Zero the meter with no weight on the platform to determine the point at which
auto zero tracking is in operation( if enabled via Set Up step F1.4.)
2.
Weigh as necessary.
3.
Use the TARE key to remove any tare weight desired, e.g. a container. If a tare
is used, the GROSS NET key can be used to view the weight with and without
the container. The GROSS NET key is only operational if the tare weight value
is non-zero. The meter will remain in GROSS mode of operation(GROSS
enunciator is lit) if the tare value is zero.
4.
The displayed weight may be toggled between pounds and kilograms at any
time with UNITS key if dual units have been enabled in Set Up Mode.
5.
Use the PRINT key to send out the configured data to the printer/computer.