Rice Lake MA37 Sartorius Moisture Analyzer - Manual (Page 51)

51
USB Interface
Operating Instructions Moisture Analyzer MA37
Connection with Sartorius Lab Printer YDP30, YDP40
2)
Printer YDP30,
YDP40
Off
Mini-A Type-B
USB Device
(Slave)
Printer equipment
supplied
t Connect the moisture analyzer to the Sartorius printer using the supplied
USB connection cable .
y The moisture analyzer detects the printer automatically . No settings need
to be changed .
Connection for 9-pin RS-232 Configuration
3)
Printer YDP20-0CE
USB-RS 232 SBI
Off
Mini-A
RS 232
9-pin
Sartorius order no.:
YCC03-D09
Serial device
with 9-pin
SUB-D plug
t Connect the peripheral device to the moisture analyzer using the Sartorius
YCC03-D09 connection cable (RS-232, 9-pin, PC-compliant assignment) .
t Define the desired settings: See Chapter “System Settings,” section “USB
Interface .”
Interface Specification
Data Output
The print command can be triggered by selecting a .
Data Output Formats
Values are always output with an ID; if more than 22 parameters are set, the values
are printed on two lines . Intermediate values are also output in other formats;
intermediate values are always printed on one line .
You can activate the printout in the Printout menu (see section “Printout”
in Chapter “System Settings”) and select whether values only or values and
intermediate values are printed .
Example: Intermediate value output 02:00 8.16 %M