Rice Lake Star LC-7211 Form Printer - Manual (Page 14)

6 Printer Setup
Important!
Never try to move the print head while the printer is plugged into a power
outlet. Doing so can damage the printer. If you have just used the printer, let
the print head cool for a few minutes before you touch it.
❏
Remove the ribbon cassette from its package.
❏
Rotate the knob on the ribbon cassette clockwise to take up any slack in the
ribbon.
❏
Carefully place the cassette onto the cartridge holder making sure that the
spindle of the holder fits into the socket on the bottom of the cassette.
❏
Press down gently but firmly on the cassette until it snaps securely into
place.
❏
Rotate the knob on the cassette again to take up any slack.
❏
Close the front cover of the printer.
Important!
Printing that is poor quality or too light is almost always due to a ribbon that is
simply worn out or “used up.” If you experience problems with print quality,
check the condition of the ribbon. If the black part looks gray and well-worn,
replace the ribbon with a new one.